How to Register Your Smart Key(CDL-100WL)
How to Register Your Password
Be sure to register your password with the door open.
1.Press [Register] button. 2. Press [1] on the main parts
(Outside)
3. Enter new password
0 1 2 3 4 5 *
Beep
Open the battery cover inside of
the main part and press [Register] button.
0 1 2 3 4 5 *
After entering new password(4~12digits)
, press [*] button. You will hear beep
sound and registration is done.
Once you press the [*] button
again, registration will be terminated.
1.You may repeat step 3. before the lamp on
[number plate] goes out.
2.You can register up to 4 passwords.
1.By registering a new password, the existing
password will automatically deleted.
2. Do not use consecutive number for your
password.
Note
Warning
1. Press [Register] button. 2. Press [2] on the main parts
(Outside)
0 1 2 3 4 5 *
Beep
Open the battery cover inside
of the main part and press
[Register] button.
1.By registering a new password, the existing
password will automatically deleted.
1.You may repeat step 3. before the lamp on
[number plate] goes out.
2.You can register up to 30 smart keys.
Note
3. Tag smart key to smart key input section.
Each time you tag the smart keys, you will hear
a confirmation tone and be registered.
Press the [Register] button on the indoor body
to complete the registration.
Warning
When registering or re-registering a smart key, you must register
all your keys together. Other smart key or transportation card will
not be registered. Also, registered smart keys are for digital door
lock only. It may not operate to other products.
To Next Page
Loading...
Need help?
General
