5-2. UTILITY(additional function)
Press the MENU button and access to UTILITY and enter the menu by pressing
the SELECT button.
(1) SPEAKER-VOLUME: setting receiver sound level while you are talking to the door camera.
* How to adjust
① Move to SPEAKER-VOLUME icon with UP /DOWN button in UTILITY Menu.
② Press the SELECT button to enter the menu.
③ Adjusting receiver level : 1 ~ 3
④ To complete the set, Press the SELECT button.
(2) CHIME-BELL VOLUME : setting call sound level.
* How to adjust (You can only adjust during a call)
① Move to CHIME-BELL VOLUME icon with UP /DOWN button in UTILITY Menu.
② Press SELECT to enter the menu.
③ Adjusting call level : 0(MUTE) ~ 3(MAX)
④ Press the SLECT button to complete the set.
(3) SCREEN MODE : to set for screen ratio.
* How to adjust
① Access to SCREEN MODE with UP /DOWN button in UTILITY Menu.
② Press the SELECT button to enter the menu.
③ Adjust screen ratio value with UP/DOWN button.
④ To complete the set, Press the SELECT button.
- ZOOM :
Zoon in(expansion) image maintaining actual ratio(4:3) is shown. (full of the screen).
- 4:3 : Image of 4:3 ratio without expansion is shown.(This is actual ratio for camera).
- WIDE: Full of the screen. Not actual ratio (4:3).
Image is expanded according to LCD (WIDE LCD) ratio.(16:9)
(4) EXIT: Go back to the UTILITY Setting menu.
5-3. INFORMATION (The function to check Model name & Version)
In o
rder to check the product information, Press the menu button and move to
INFORMATION menu with UP/DOWN button.
(1) MODEL : You can check the model name.
(2) VERSION : You can check the model version.
(3) SYSTEM : SINGLE (FINE VIEW VIDEOPHONE)
(4) TOUCH : You can check the touch-key version.
(5) VIDEO : You can check the video transmission formats(NTSC/PAL)
(6) SOURCE : You can check the position of camera(DOOR1 / DOOR2) which is
shown on the screen for now.
5-4. EXIT (Finish setting menu)
6 7
To Next Page
Loading...
Need help?
General
