10
6. Attaching Consideration
When selecting the location for attaching your unit, please remember...
- Bottom should be of sufficient strength to
permit attaching.
- Allow adequate space on the both side of
the unit for proper venti lation access to
cable and unit for viewing easy.
- For angular field of camera view adjust by
manually be sure there is sufficient space
behind the unit to adjustment to angular
field of view its position.
- A power cord should be within reach of the
DC line cord with the cord properly extend-
ed and secured (For using adapter is supplied and optional).
- The area directly below the unit should not be used for cooking radiator or by other
appliances generating heat or steam.
- Hold the unit and in various locations while you think through what will be the mos con-
venient location in your surveillance place.
Keep in mind your normal work pattern especially the use of other counter top electri-
cal appliances.
- Try your unit in various location in the Hotel Super Convention Department Store
Factory Apt to find the area offering the best possible reception.
To Next Page
Loading...
Need help?
General
