9. Troubleshooting Guide
14
Condition Checking Points Solution
- Are the camera and connected
equipment turned on ?
- Is the lens adjusted properly ?
- Are cables connected correctly?
- Are your correct connector?
- Are you checking the monitor?
- Is the monitor adjusted correctly?
(when switched to manual adjustment)?
- Was the white balance of the camera
adjusted
- Is the lighting too weak?
- Is often caused by local interference
(e.g cars, neon signs, and hair dryers etc).
No Image
Noise Picture
Unnatural Color
Dotted Lines or
Strips
Make sure that system unit is plugged.
Make sure that adjusted properly your desired.
Make sure that system cable correct connection of the unit
Make sure that connector is correct level.
Check connecitons between system, polarizer and relay.
Make sure that CONT, BRT,COLOR as well as desired.
Check that adjusted as well as matching to circumstance.
Make sure that adjusted your monitor or other controls.
Make sure that your unit is stable or not environment.
Make sure that your unit is stable or not environment.
Make sure that readjustable to Back Focus of lens.
To Next Page
Loading...
Need help?
General
