10
6. Attaching Consideration
When selecting the location for attaching your unit, please remember...
- Bottom should be of sufficient strength to
permit attaching.
- Allow adequate space on the both side of
the unit for proper venti lation access to
cable and unit for viewing easy.
- For angular field of camera view adjust by
manually be sure there is sufficient space
behind the unit to adjustment to angular
field of view its position.
- A power cord should be within reach of the
DC line cord with the cord properly extend-
ed and secured (For using adapter is supplied and optional).
- The area directly below the unit should not be used for cooking radiator or by other
appliances generating heat or steam.
- Hold the unit and in various locations while you think through what will be the mos con-
venient location in your surveillance place.
Keep in mind your normal work pattern especially the use of other counter top electri-
cal appliances.
- Try your unit in various location in the Hotel Super Convention Department Store
Factory Apt to find the area offering the best possible reception.
To Next Page
Loading...
