Commodore 16 - Page 15

SETTING UP
YOUR COMPUTER
YOU CAN USE EITHER THE RF JACK OR
VIDEO SOCKET—YOU WONT NEED BOTH!
The High/Low Switch
• Use this switch to set your Commodore 16s TV
channel output:
You can use either channel 3 or 4 on your TV to
display the video picture from your computer.
Set this switch to L to use your computer on
channel 3, or to H for channel 4. If you have a
TV station on channel 3 in your area, select
channel 4, and vice versa. Experiment to see
which setting gives you the best picture. If you
have a monitor, you won't need to worry about
this switch.
The Serial Socket
• You can plug a disk drive or a printer into this
socket.
To use both, first plug the disk drive into this open
ing, then plug the printer cable into the back of
the disk drive.
The Cassette Port
• The Commodore 1531 Datassette™ tape recorder
for cassette tape software plugs in here.
• The Datassette is used to load or store programs
on cassette tape, and is specially designed for your
Commodore 16.