Commodore 16 - Sound and Music

SOUND AND MUSIC
With your Commodore 16, you can design music and
sound programs, enhance other programs with music
and sound effects, or just play around and experiment
with your computer's sound.
• Here's how to play a single note on your
Commodore 16:
First: Type VOL 8 and press lETURN
Second: Type SOUND 1,266,60 and press
RETURN
You should hear a note play for about a second
and then stop. If you don't hear anything, turn
up the volume of your television or monitor and
try it again.
• These two steps are the only commands you need to
know to play music on your Commodore 16. Both
commands are easy to understand and easier to use.
The Volume Command
• The VOL command controls the VOLume of the
notes that your Commodore 16 plays.
• The number after VOL sets the volume from LOUD
(VOL 8) to OFF (VOL 0)
45-