Commodore 16 - Screen Display and Basic Operations

USING SOFTWARE
Loading A Program On Cassette Tape
• The steps for loading a program on cassette tape
are as follows:
1 Insert the cassette into your Datassette
and close the door.
2 Rewind the tape to the beginning by press
ing the REWIND button on the Datassette.
3 Press the STOP button on the Datassette.
when the tape is rewound to the beginning.
Then type LOAD and press the Ijj
key.
The computer responds with:
PRESS PLAY ON TAPE
Press the PLAY button on the Datassette.
The screen goes blank as the Datassette
starts. When a program is found the screen
displays this message:
28
—