34
use a new version which supports larger disks. Try the one supplied with a new filesystem such as
Smart File System (SFS) from http://strohmayer.org/.
13. Installing Workbench onto a Hard Disk
Boot off the Install disk and run the InstallHD script to install Workbench 2.0 or if you have an older
version of Workbench run the UpgadeWB script to update Workbench.
If you do not have an Install disk, you can manually install Workbench, by opening a Shell window,
insert the workbench disk on DF0: and type:
COPY DF0: TO DH0: ALL CLONE QUIET
This will copy all the folders and files (including the important hidden drawers) from your Workbench
floppy disk to your Hard disk (HD0: in this case).
You can copy the contents of the other disks as well using the same copy command, for Fonts, make
sure you create a Fonts drawer on the hard disk first, and copy the fonts disk contents into that folder.
To Previous Page
Loading...
