Need help?Do you have a question about the CommScope RUCKUS ICX 7450 and is the answer not in the manual?
Defines text and notice conventions used in the guide.
Explains the use of NOTE, CAUTION, and DANGER statements in the document.
Explains how bold and italic text identify command syntax components.
Summarizes new information and enhancements added to this edition of the document.
Details the capabilities and features of the Ruckus ICX 7450 switch.
Explains how port numbers are entered and displayed in CLI commands and outputs.
Lists and describes the types of expansion modules supported by the Ruckus ICX 7450.
Lists all items included in the shipping carton for the Ruckus ICX 7450 device.
Provides guidance on installing the Ruckus ICX 7450 as a standalone unit, in an EIA rack, or in a Telco rack.
Provides step-by-step instructions for installing the device on a flat surface.
Details factors to consider and general steps for mounting the switch in a rack.
Explains how to connect multiple Ruckus ICX 7450 devices to form a stack.
Explains how to connect the grounding terminal for proper operation and safety.
Guides on how to mount the device flush with the front of the rack.
Instructions for mounting the device recessed in the rack by reversing brackets.
Key points to consider when installing or replacing a power supply unit.
Step-by-step instructions for installing an AC power supply unit into the Ruckus ICX 7450.
Step-by-step instructions for installing a DC power supply unit into the Ruckus ICX 7450.
Lists and describes the LEDs located on the front panel of the Ruckus ICX 7450-24.
Lists and describes the LEDs located on the rear panel of the Ruckus ICX 7450.
Describes various LED states and their corresponding meanings for management ports.
Details temperature thresholds, fan control, and monitoring of power and cooling systems.
Provides guidance on minimal maintenance, recommending cleaning fiber-optic connectors.
Instructions for removing and replacing SFP, SFP+, or QSFP+ transceivers.
Overview of how to remove and replace Field Replaceable Units (FRUs) like power supplies and fans.
Instructions for replacing redundant, hot-swappable fan units.
Details the enclosure, power supplies, fans, cooling, and system architecture of the ICX 7450.
Specifies operational and non-operational environmental conditions like temperature, humidity, altitude, shock, and vibration.
Lists power consumption for maximum configurations of ICX 7450 models under load.
Lists Ethernet port types, module numbers, and compatibility for various ICX 7450 models.
FCC warning regarding Class A digital device compliance and potential interference.
VCCI compliance statement for Class A product and potential radio disturbance.
Warning statement regarding Class A product and potential radio interference in domestic environments.
General cautions to be aware of for safe installation and operation of the device.
Lists various danger notices related to electrical shock, laser radiation, and equipment handling.
To Next Page
General
