860576982
Issue 5, September 2015
www.commscope.com
Engine 3 Model 4834 Installation
© 2015 CommScope, Inc.
All rights reserved
For RoHS Inquiries:
CommScope Inc.
Corke Abbey, Bray
Co. Dublin, Ireland
Attn: Legal Department
General
The Redwood
®
Engine 3 Model 4834 powers and communicates with Redwood gateways, sensors,
and wall
switches to
provide intelligent lighting control and building intelligence. The engine provides a sophisticated level of
control w h i c h significantly reduces energy consumption. Multiple engines can be linked together to
power and
control hundreds or thousands of fixtures.
The engine provides communications and control for all types of lighting including LED, fluorescent, CFL
and HID.
In the case of LED lighting, the engine also provides centralized AC to DC power conversion. It
takes high voltage
200–250 VAC or 277 VAC input power, converts it to low-voltage DC, and distributes the power to all fixtures via
Redwood LED sensors and gateways using Class 2, low-voltage cabling. The engine can be located on a rack or
wall mounted in an electrical or telecom closet.
Ordering information is listed below:
Engine, generation 3, 200–250 VAC
Engine, generation 3, 277 VAC
Redwood
®
Engine 3 Model 4834
How to Contact Us
To find out more about CommScope
®
products, visit us on the web at www.commscope.com/
For technical assistance:
- Live technical support for Redwood
®
products is available Monday through Friday from
8 AM to 5 PM (PST), excluding holidays.
- Within North and South America, contact your local account representative or technical
support at 1-800-840-0709 (Option 2). Outside North and South America, contact your
local account representative or technical support at +1 510-270-5360 (Option 2).
- An email can also be sent to RedwoodSupport@commscope.com for technical support.
To Next Page
Need help?
General
