CommScope Engine 3 Model 4834 - Port Indicator Status; Engine Port LED Indicator Status; Ethernet Indicator Status

www.commscope.com
860576982
Instruction Sheet
Page 7 of 7
Port
Indicator Status:
Each port on the engine has a multi-color LED to communicate status for that port. After a period of inactivity, the
LEDs are turned off to save energy. To activate the lights, press the Show Status button on the engine faceplate.
Engine Port LED
Indicator Status
Port Status
Off
No device connection is detected on the port.
Solid green
The engine recognizes the device connection.
Blinking green
The engine is upgrading the firmware of a gateway.
Solid amber
The engine is in the process of discovering a fixture. Alternately, an error has
occurred after discovery.
Ethernet
Indicator Status:
Ethernet Status
Indicator
Ethernet Status
Off
An Ethernet connection is not detected on this port.
Blinking green
The engine recognized the Ethernet connection.