INS_CNFE3TX2CXMS(U,E)_REV– Rev. 7.11.18 PAGE 39
QUICK START GUIDE CNFE3TX2CXMS(U,E)
TECH SUPPORT: 1.888.678.9427
Event Warning Setting
When an error occurs, the device will notify you through system log, and SNMP messages. You
can configure the system to issue a notification when specific events occur by checking the box
next to the event.
Syslog Server Settings
Label Description
Syslog Server IP Enter the IP address of a remote server if you want the logs to be stored remotely.
Leave it blank will disable remote syslog.
Syslog Server Port Specifies the port to be logged remotely. Default port is 514.
To Next Page
Loading...