INS_CNGEMC4+2[POE][HO]/M 09/08/20 PAGE 12
INSTALLATION AND OPERATION MANUAL CNGEMC4+2[POE][HO]/M
TECH SUPPORT: 1.888.678.9427
SFP Transceivers
The media converter has fiber optic ports that utilize SFP connectors. ComNet offers a wide
selection of SFP modules that offer different fiber type, connector type and distances. Please
remember that the TX port of unit A should be connected to the RX port of unit B.
Media Converter A Fiber Cord Media Converter B
Console Cable
Each CNGEMC4+2 media converter can have the initial network settings configured by the
management console port. You can connect them to a PC with USB Ports using the supplied USB
to USB Mini B male plug cable.
USB to USB Mini B Cable
To Next Page
Loading...
