Compac C4000

Calibration ('K') Factor
Set-up Modes
Compac Industries Ltd.
Page 24
www.compac.co.nz
Setting the Calibration 'K'Factor
Refer to C4000 Set-Up K Factor Switch Settings (see page 21) The
displays will indicate as below
Type
Price Display
indication
Volume Display
Indication
Single Hose
„F‟
„X.XXXX‟
Dual Hose
Side “A”
Side “B”
„F‟
„Fb‟
„X.XXXX‟
Quad or Multi-
product
Hose 1
Hose 2
Hose 3
Hose 4
„F1‟
„F2‟
„F3‟
„F4‟
„X.XXXX‟
Once the dispenser/pump resets with the correct 'K' factor
entered, the display will show the new volume unless the 'head' is in
"Compensation Mode", in which case the display volume will not change.
Be careful when calibrating dual or multi-hose pumps &
dispensers to ensure that the correct 'K' factor is being changed.