Compak PKF - Manual, Preset, and Instant Modes

ORIGINAL INSTRUCTIONS | QUALITY PROCESS REF. | V. 09|10|2020 | K07185
22
9. OPERATION
9.4. MANUAL GRIND MODE
This operating mode allows you to use the
weighing system manually.
To do this, insert the portalter or dosing
container into the portaportalter, select
TARE to set the weight to 0; start the
grinding cycle using the Grind button for
dose production (
8
) or the manual Rell
button (
17
), the weight of the ground coffee
will be shown in real time on the display.
9.5. PRESET MODE
In this operating mode, we preset one,
two or three* doses of coffee by pressing
the corresponding number icon on the
display’s settings buttons (
).
The pre-selection of one, two or three*
doses will remain active until it is
changed by pressing the one, two or three*
preset number button. This pre-selection
will be shown on the display (
)by its
corresponding icon.
9.6. INSTANT MODE
In this operating mode, you can select
1, 2 or 3 coffee doses by pressing the
corresponding number icon on the LCD
screen once (
). First, the portalter must
rst be inserted, the TARING message
appears and the Select Dose message,
after pressing 1, 2 or 3 the grinding cycle
begins until the desired dose is reached.
The Rell button (
17
) allows the portalter
to be lled manually once the grinding
cycle is nished. It must not be used during
the grinding cycle or the taring operation
as it will result in weighing errors or error
messages.