Help information
Set Supervisor Password
Install or change the password and the length of password must be greater than one word.
Power on Password
Enable:System will ask input password on post time. Disable:System will ask input pass-
word when go to Setup Utility
Set HDD Password
Lock Hard disk and the length of password must be greater than one word.
Password behavior
Supervisor Password and Power on Password
After set the supervisor password , power on password can enable or disable.
If only set the supervisor password, system will request supervisor password before
entering setup menu(F2). Users have 3 chances to input supervisor password,
system will request shutdown if users input wrong password 3 times.
If set power on password, system will request the password after power on the
machine . Users have 3 chances to input power on password, system will request
shutdown if users input wrong password 3 times.
HDD Password
After set the HDD password, system will request HDD password before entering setup
menu(F2) or boot menu(F12) or OS or resume from S4. Users have 5 chances to
input HDD password, system will request shutdown if users input wrong password 5
times.
User Password
After set the user password, if use user password entry setup menu, user only can
read setup menu information and can not change setup menu itemes.
To Next Page
Loading...
