10
4
3
2
1
Step 2. Place a selection of articles in the spinning tub and insert
the spin disc.
Step 3. Rotate the Cycle Selector switch in a clockwise direction
and select Drain.
SPIN DRYING
Step 1. Open the External and Internal lids of the spinning tub and remove the
plastic spin disc. Note: It is important that the spin disc is used every
time so as to allow correct operation of the spinner tub.
Step 4. Close both lids and rotate the spin timer in a clockwise direction to
select the desired spinning time. See the Washing Guide to set the
correct time.
To Next Page
Loading...
