11
6
1
5
Step 5. Open the External and Internal lids of the spinning tub and remove the
plastic spin disc.
Step 6. Rotate the Cycle Selector in an anti-clockwise direction
and select Normal.
Step 2. Wash down with clean water and then replace.
With the appliance disconnected from the AC input all external surfaces can be
cleaned with warm soapy water taking care not to allow to much water to enter
the control panel. Do not use abrasive cleaners or bleach.
Do not submerge the appliance in water.
When storing for periods of time, flush out washing and spinning tub with clean
water then allow to dry completely before storing away.
MAINTENANCE AND STORAGE
The appliance is fitted with a lint collection point that must be cleaned regularly.
Step 1. Drain all water from the appliance and remove the filter.
To Next Page
Loading...
