9
1
4
2A
2B
3
RINSING
Step 1. Rotate the Cycle Selector in an anti-clockwise direction
and select Normal.
Step 2. Half fill tub with water via either the water inlet located
on the top of the appliance (A) or directly in to the tub (B).
Step 3. Place articles in the tub and complete filling the tub with water to the
required level mark – Do not use washing liquid or powder.
Step 4. Rotate the timer in a clockwise direction to select the length of
time, in minutes, that is required. See the Washing Guide to set
the correct time.
Step 5. Repeat the Draining Operation.
To Next Page
Loading...
