Compaq 5000 Series Hardware Guide

C
OMPAQ
H
ARDWARE
G
UIDE
9
Upgrading Computer Memory
1. Complete the “Accessing Internal Computer Components”
procedure for your computer model.
2. Pull outward on the release latches found on both ends of the
memory slot
2
.
3. Align the memory module
1
with the memory slot on the
system board.
4. Push the module carefully and firmly into the slot, ensuring
that the latches
2
on both ends snap into place.
Note: Press gently to ensure the memory module is properly positioned.
Random access memory
(RAM) is the working
space of your computer.
Data and instructions are
stored there temporarily in
memory.
There are several different
types of memory modules.
You must install the same
type of memory currently
in your computer.
If a blank screen is displayed
after replacing the memory
module, the memory is
installed incorrectly. Repeat
the procedure to ensure that
the memory module is
properly positioned.
Upgrade the memory in your
computer with modules of the
type and speed that are
identical to the memory
originally installed in your
computer.

Compaq 5000 Series Specifications

General

Memory Type	SDRAM
Optical Drive	CD-ROM or DVD-ROM
Audio	Integrated
Operating System	Windows 98
Ports	USB, Serial, Parallel, PS/2
Expansion Slots	PCI