Compaq 5000 Series - Verifying Proper Installation; Reconnecting Power and Peripherals; Powering On and Testing

18 R
EPLACING THE
S
YSTEM
B
OARD
XII. Removing the Graphics Card
To remove the graphics card, complete the following
procedure:
1. With the computer on its side (open side facing up), locate
the graphics card (see Figure 12-1).
2. Remove the screw 1 securing the graphics card
(see Figure 12-1). Keep the screw 1 that secured the card
to the chassis. You will need it when replacing the card.
3. Using a gentle rocking motion, pull the graphics card
from the AGP slot 2 on the system board
(see Figure 12-1).
Figure 12-1