8-6 Connecting External Devices
Writer: Lorise Fazio Saved by: J Abercrombie Saved date: 12/08/98 4:11 PM
Part Number: 310296-002 File name: Ch08.doc
5. To configure for a desktop system, (a) place the Monitor Stand
on top of the system, (b) place the external monitor on top of
the stand, and (c) connect the external monitor, external
keyboard, and mouse to the rear connectors on the
convenience base.
6. Turn on all external devices connected to the convenience
base.
7. Slide the power switch on the computer, or press the power
button on the convenience base
3.
Undocking the Computer and Mobile 3500
Expansion Unit from the Convenience Base
The undocking process varies, depending on your operating
system. To undock your computer and Mobile 3500 Expansion
Unit (M35EU) from the optional convenience base:
1. From the Windows 95 Start menu, click Start Æ Eject PC.
Wait to click OK, then physically undock the computer. If
you're using Windows NT, shut down the computer by
clicking Start Æ Shut Down.
CAUTION:
Failure to use the ejection procedure may cause
loss of data or unpredictable results.
NOTE:
Not all network operating systems support "hot
docking" (while the computer is on).
To Next Page
Loading...
