Connecting External Devices 8-7
Writer: Lorise Fazio Saved by: J Abercrombie Saved date: 12/08/98 4:11 PM
Part Number: 310296-002 File name: Ch08.doc
2. Close the display if not already closed.
NOTE:
Disconnect the PC Card cable and unlock the security
cable, if applicable, to prevent damage.
3. Slide the power switch on the computer, or press the power
button on the convenience base
1
.
4. Pull the docking lever fully forward to undock the computer
and M35EU
2
.
5. Slide the computer and M35EU forward from the convenience
base to remove
3
.
6. If the computer display is blank, press the
Fn+F4
hotkeys to
switch the display from the external monitor to the computer
display.
To Next Page
Loading...
