To Next PageTo Next Page
Need help?Do you have a question about the Compaq LTE Elite and is the answer not in the manual?
Lists the Compaq LTE Elite models and their specific features and general features.
Describes the computer's controls, LEDs, and their functions.
Details the power management features for conserving AC power and extending battery life.
Outlines essential preliminary steps before running POST or Computer Checkup.
Explains the POST diagnostic tests run automatically when the system is turned on.
Describes how to run Computer Checkup to determine assembly and option functionality.
Provides tables for diagnosing problems not identified by POST or Computer Checkup.
Lists the necessary tools and software required to service the computer.
Details procedures for installing and removing memory expansion boards.
Covers procedures for removing and replacing the auxiliary battery.
Details procedures for removing the display assembly.
Provides steps for removing and replacing the display bezel.
Details procedures for removing and replacing the display panel.
Provides steps for removing and replacing the inverter board.
Details procedures for removing and replacing the trackball board.
Provides steps for removing and replacing the display cable.
Covers procedures for removing and replacing the keyboard.
Covers procedures for removing and replacing the hard drive.
Covers procedures for removing and replacing the internal AC power supply.
Details procedures for removing the system board and I/O bracket.
Details the automatic docking mechanism and expansion base features.
Details external I/O connectors and internal drive bay connectors for the SmartStation.
Covers functional descriptions of key parts and features of the Compaq SmartStation.
Provides instructions for running Computer Setup when docking or installing devices.
Outlines the security features of the expansion base, including keylock assembly.
Lists possible solutions to check before replacing parts.
Contains troubleshooting information for common problems with the SmartStation.
Lists problems related to battery charging and their recommended actions.
Addresses issues related to docking the computer into the expansion base.
Addresses issues related to undocking the computer from the expansion base.
Addresses problems related to power issues with the expansion base.
Lists common SCSI problems and verification steps.
Details essential precautions for servicing the expansion base.
Provides steps to complete before starting removal or replacement procedures.
Covers procedures for removing and replacing the battery pack from the battery charger.
Covers procedures for removing and replacing the power supply and bezel.
Covers procedures for removing the system board and battery charging compartment.
Details procedures for configuring the system for an IDE hard drive.
Details proper packaging and grounding precautions to prevent ESD damage.
Describes methods for grounding at workstations, including wrist and foot straps.
Lists general guidelines for using SCSI-2 devices, including compatibility and termination.
Covers installation procedures for an internal SCSI-2 drive in the SmartStation.
Details how to install SCSI-2 drivers for the Compaq LTE Elite and Lite.
General