EasyManua.ls Logo

Compaq LTE Elite - PCMCIA Compartment Door Removal

Compaq LTE Elite
387 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
NOTE: The I/O connector cover, Automobile Adapter door, and hard drive
compartment door are available in the Doors Kit (Table 3-9).
4.20 PCMCIA Compartment Door
The PCMCIA compartment door comes installed on the computer base enclosure.
The door and spring are also available separately in the Doors Kit
(Table 3-9).
Removing the PCMCIA Compartment Door
To remove the PCMCIA compartment door, complete the following steps:
1. Open the door.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> CAUTION <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
To avoid possible damage to the PCMCIA connector or cards, be sure that all
PCMCIA cards have been removed before removing the PCMCIA compartment door.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
2. Carefully flex the door near the front [1] (Figure 4-54) to release the
hinge from the computer base enclosure.
3. Carefully flex the door near the rear [2] to release the hinge and
spring from the computer base enclosure (Figure 4-54).

Table of Contents

Related product manuals