Compaq LTE Elite User Manual

The manual eject The override blocker Ensure that the
override bracket cannot move freely. override blocker can
cannot be accessed. move freely in the
(Bracket is not bottom cover. If it
visible through its cannot move freely,
slot.) ****** replace the bottom
cover.
--------------------------------------------------
The manual eject override 1. Straighten the
bracket is bent. manual eject
override bracket.
2. Replace the
docking mechanism.
---------------------------------------------------------------------------
The manual eject The manual eject override 1. Ensure that the
override bracket bracket spring is not small spring on
does not spring back attached. the back of the
after the computer is mechanism is
removed. ****** hooked on both the
bracket and the
carriage. Reattach
the spring if
necessary.
2. If the spring
doesn't stay in
place, replace the
spring.
3. If the spring
still doesn't stay
in place, replace
the docking
mechanism.
--------------------------------------------------
The manual eject override 1. Straighten the
bracket is bent. manual eject
override bracket
to allow it to
properly spring
back.
2. Replace the
docking mechanism.
---------------------------------------------------------------------------
****** The manual eject override bracket is integrated into the docking
mechanism.
===========================================================================
Table 7-3. Enclosure Alignment Problems
===========================================================================
Problem Probable Cause Recommended Action(s)
===========================================================================
Bottom cover does not Metal liners are in the 1. Ensure that the
latch firmly. way. metal liners are
straight all
around the
expansion base. If
not, attempt to
straighten them.
2. If the liners
cannot be
straightened,

Compaq LTE Elite Specifications

General

Brand	Compaq
Model	LTE Elite
Category	Laptop
Language	English