NOTE: The automobile adapter converts 12 volts DC from the automobile to
18.5 volts DC for use by the computer.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> CAUTION <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
The computer has an access door for the automobile adapter connector that
is designed to allow only one type of power input (AC or DC) to be
connected at a time (Figure 1-5). Do not attempt to defeat this protective
feature of the door or internal damage to the computer may result.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
Serial Connector
The serial connector supports the serial interface which meets EIA RS232C
specifications.
198-Pin External Options Connector
The 198-pin external options connector handles the signal interface between
the computer and the expansion base or convenience base.
NOTE: When connected to an expansion base, power to the computer is carried
through the 198-pin connector (DC power).
To Next Page
Loading...
Need help?
General