EasyManua.ls Logo

Compaq dc7700 - Convertible Minitower PC - Virtual Appliance Installation Process; VA 2.6 Installation Steps

Compaq dc7700 - Convertible Minitower PC
14 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
The HP Compaq dc7800p Business PC is an Intel vPro processor technology branded system that meets
all Intel vPro processor technology hardware requirements and supports VA 2.6.
In addition to the hardware requirements, HP recommends that the system has a minimum of 1-GB RAM.
Virtual Appliance Installation
Currently, VA 2.0 and VA 2.6 must be installed on a system with Windows XP 32-bit. The system must
meet or exceed the hardware and BIOS requirements mentioned in the previous sections.
The following provides an example of a VA 2.6 appliance installation:
1. Run the VA Setup file.
2. Follow the directions from the installer.
3. Reboot the system.
4. If necessary, enable VT in F10 Setup, and then reboot.
5. Go into the MEBx by pressing Ctrl+P during POST.
6. Type the MEBx password.
7. Select Intel AMT Configuration.
The VA Configuration option will now be available at the bottom of the AMT Configuration list.
Figure 1 VA Configuration option in the MEBx

Other manuals for Compaq dc7700 - Convertible Minitower PC

Related product manuals