Do you have a question about the Compaq dc7800 - Convertible Minitower PC and is the answer not in the manual?
Chipset | Intel Q35 Express |
---|---|
Memory | Up to 8 GB DDR2 SDRAM |
Form Factor | Convertible Minitower |
Processor | Intel Core 2 Duo, Intel Pentium Dual-Core, Intel Celeron |
Storage | SATA Hard Disk Drive or Solid State Drive |
Graphics | Integrated Intel Graphics Media Accelerator 3100 |
Optical Drive | DVD-ROM, DVD+/-RW |
Networking | Integrated Intel Gigabit Network Connection |
Ports | USB 2.0, serial, parallel, VGA, audio in/out, PS/2 |
Audio | Integrated High Definition Audio |
Operating System | Windows XP, Windows Vista |
Expansion Slots | 1 PCI Express x16, 3 PCI |
Power Supply | 365W standard efficiency or 80 PLUS power supply |
Provides definitions for key terms related to AHCI and RAID technology.
Steps to enable AHCI mode for a single drive using the F10 System BIOS.
Details RAID 0 configuration using two striped hard drives for performance.
Details RAID 1 configuration using two mirrored hard drives for reliability.
Details RAID 5 configuration using three hard drives with parity for performance and redundancy.
Explains how Matrix RAID combines different RAID levels for reliability and performance.
Lists HP's recommended factory RAID configurations for HP Compaq dc7800 PCs.
Explains how RAID interacts with HP Backup and Recovery for system restore.
Describes other supported RAID configurations for two and three hard drive setups.
Lists RAID configurations that HP does not support on these PCs.
Step-by-step guide to enable RAID through the F10 System BIOS.
Instructions on creating RAID volumes using the RAID Option ROM utility.
Information on necessary RAID drivers for OS installation to avoid boot failures.
Detailed steps for installing the Intel Matrix Storage Console software.
Guide to navigating the Intel Matrix Storage Console interface for status checks.
Steps to migrate from non-RAID to RAID 1 using the Intel Matrix Storage Console.
Explains how to handle and recover from RAID volume degradation events.
Steps to migrate from non-RAID to RAID 0 using two hard drives.
Steps to migrate from non-RAID to RAID 0 using three hard drives.
Steps to migrate from non-RAID to RAID 5 using three hard drives.
Steps to migrate to Matrix RAID 0 and 5 from three non-RAID hard drives.
Steps to migrate to Matrix RAID 0 and 1 from two non-RAID hard drives.
Explains supported command-line flags for installing Intel Matrix Storage Manager.