Compaq dc7800 - Convertible Minitower PC - Migrate to RAID 0 from Two Non-RAID Drives

23
3. After replacing the hard drive, automatic rebuild of the redundancy begins immediately after the sys-
tem is powered up and operating system starts. The following message appears:
Migration to RAID 0 from two non-RAID hard drives using Intel Matrix Stor-
age Console
NOTE: HP Compaq dc7800 Business PC products only support RAID based on two identical SATA hard
drives in either RAID 0 or RAID 1 or Matrix Mode of RAID 0 and RAID 1.
1. Open the Intel Matrix Storage Console and select Improve storage performance with
RAID 0.
2. Click Actions > Create a RAID 0 volume to open a verification window.