"Compaq.com - Compaq Presario Series Maintenance and Service Guide - Models: 1246, 1277, 1278, and 1279
Maintenance & Service Guide
Presario Series
Models: 1246, 1247, 1277, 1278, and 1279
| Home Page | Notice | Preface | Product Description | Troubleshooting
Illustrated Parts Catalog | Removal & Replacement Procedures | Specifications
Pin Assignments | Battery Pack Operations
Removal and Replacement Procedures
Service Considerations
Listed below are some of the considerations that you should keep in mind during the
disassembly and assembly of the computer.
Tool and Software Requirements
To service the computer, you need the following:
● Compaq screwdriver kit (Spare Part No. 161946-001)
● Torx T-9 screwdriver
● 3/16-inch and 5mm nut drivers (for screwlocks and standoffs)
● Small, standard screwdriver
● Small, Phillips screwdriver
● Diagnostics software
Screws
The screws used in the computer are not interchangeable. If an incorrect screw is used
during the reassembly process, it can damage the unit. Compaq strongly recommends
that all screws removed during disassembly be kept with the part that was removed, then
returned to their proper locations.
IMPORTANT:
As each subassembly is removed from the computer, it should be placed
away from the work area to prevent damage.
file:///C|/SERVICE%20MANUALS/COMPAQ%20_%20chec...ERIES%201246%201277%201278%201279/service.html (1 of 2)6/27/2004 2:34:03 AM
To Next Page
Loading...
