Compaq Presario 7360 - Installing a Downloaded Program File

Introducing Microsoft Windows
6-9
Installing a Downloaded Program File
*
HINT:
If you choose to download software from a Web site, follow the installation
instructions that may be included on the Web page. If installation instructions are not
available, complete the steps below.
To install a program file that you have downloaded from the Internet to your hard
drive, complete the following steps:
1. Terminate your Internet connection.
2. Close all open programs.
3. From the Windows Taskbar, click the
Start
button, point to
Settings
, and then
click
Control Panel
.
4. Double-click the
Add/Remove Programs
»
icon. The Add/Remove
Programs Properties window is displayed. Click
Install
. The Install Program
from Floppy Disk or CD-ROM window is displayed. Click
Next
. The Run
Installation Program window is displayed. Click
Browse
.
5. Locate and select the Setup.exe or Install.exe file for the downloaded software.
6. Click
Open
to begin the installation process.