The display cable is available using spare part number 486735-001.
17. If it is necessary to replace the display hinges, remove the four silver Phillips PM2.0×3.0
screws (1) that secure each hinge to the display.
18. Remove the display hinges (2) from the display. The display hinges are available using spare part
number 486737-001.
19. If it is necessary to replace the wireless antenna transceivers and cables, remove the
Phillips PM2.5×3.0 screw (1) that secures each transceiver to the display enclosure.
20. Detach the wireless antenna transceivers (2) from the display enclosure. The transceivers are
secured by a foil wrapping.
21. Remove the wireless antenna cables from the clips (3) built into the display enclosure.
Component replacement procedures 55
To Next Page
Loading...
