Compaq TFT 1501 - Selecting Items in the OSD Menu; Making Adjustments in the OSD Menu

14
Selecting Items in the OSD Menu
To select a specific item in the OSD Main Menu, or a specific item in the OSD submenu, use the Up
(
▲
) and Down (
▼
) buttons to move to that item, and then select it by pressing the Select ( )
button.
Making Adjustments in the OSD Menu
Adjusting the Positions of the Displayed Images
To adjust the horizontal (or vertical) positions of the displayed images, follow the steps below:
1. Open the OSD Main Menu by pressing the Select (
) button.
2. Press the Up (
▲
) or Down (
▼
) buttons to move forward or backward to the H . POSITION
(or V . POSITION) icon and highlight it.
3. Press the Select (
) button to select it. This will open the H . POSITION (or V . POSITION)
bar with the associated numeric value for your adjustment onscreen.
4. Press the Up (
▲ ) or Down ( ▼ ) buttons to adjust its value. The range for adjustment is from
0 to 100. The Up (
▲
) button will increase the numeric value of the setting and the Down (
▼
)
button will decrease it.
Adjusting the Clock and Phase Settings
To adjust the clock (or phase) setting, follow the steps below:
1. Open the OSD Main Menu by pressing the Select (
) button.