2nd BEEP
SPLIT
This button displays the dierence between the current shot and the previous
shot. Holding down the SPLIT button while pressing the REVIEW button will
review the split times. It will show the shot number for .5 seconds followed by
the split time. Holding down the NUMBER and SPLIT buttons while pressing
the REVIEW button will review split times in reverse order. This button also
changes digits in the .1’s place when setting a second beep.
To get a second beep (par time), begin by holding down the 2nd Beep button.
The display will show “PAr” for 1.5 seconds, followed by the current 2nd Beep
setting. While you continue to hold the 2nd Beep button, press the REVIEW,
NUMBER, or SPLIT buttons to set a desired time. (If no 2nd Beep is desired, set
the number to 0). The value is saved in power down memory. Now the beeper
will sound at the set time interval after the start beep. Once you release the
2nd Beep button, the REVIEW, NUMBER, and SPLIT buttons will return to their
normal function. The button is slightly recessed to prevent unintended time
settings from accidental button presses.
5
To Next Page
Loading...
