Compex Runner User Manual

18
English
6. Personalising a programme
The programme personalisation screen is not
available for all programmes!
5a Press the On/O button to return to the
previous screen.
5b Some programmes require manual
selection of the muscle group you want to
stimulate. This muscle group is shown in
black on a small gurine above channel 1.
Use the channel 1 +/- button to select your
chosen group. The seven muscle groups
proposed are shown successively in black
on the small gurine:
Abdomen and lower back
Buttocks
Thighs
Legs and feet
Forearms and hands
Shoulders and arms
Thorax and back
Current international standards
require that a warning be given concerning
the application of electrodes to the thorax
(increased risk of cardiac fibrillation).
N.B.: If a cable tted with the
m i-SENSOR
system (sold separately) is connected to
the device, the muscle group is selected
automatically.
5c Press the channel 2 +/- button to stop
the warming-up sequence (closing the
small animated rising convection symbol
above the radiator).
5d Press the channel 3 +/- button to choose
the programme diculty level.
5e Press the channel 4 +/- button to conrm
your choices and launch the programme.
7. During the stimulation session
Preliminary m i-SCAN test
The m i-SCAN test is launched only if
a cable fitted with the
m i-SENSOR system
(sold separately) is already connected to the
stimulator when this is turned on!
It is essential that you remain completely
still and relaxed during the entire test.
If the
m i-SENSOR system is connected, the
test starts immediately after programme
selection and personalisation.
6a Press the On/O button to interrupt
the test at any moment. To relaunch the
test from the start, press any of the 4 +/-
buttons.
6e The
m i logo above channel 4 indicates
that the
m i-SENSOR cable is connected to
the stimulator. The gures in channel 4 will
automatically change during the test as the
sensor records dierent measurements.
The 4 +/- buttons will be disabled for the
duration of the test.
Once the test is complete, you will
automatically be taken to the default
programme start screen and prompted to
increase the stimulation energies.

Compex Runner Specifications

General

Brand	Compex
Model	Runner
Category	Switch
Language	English