Hardware Installation
Warning
Unplug your PC’s main power cord before installing VideoMate M1F PCI
card. Failure to do so may cause damage to your VideoMate M1F PCI card
and void your warranty.
1. Shut down your computer and unplug main power cord.
2. Remove the computer case cover.
3. Plug one end of the internal audio patch cable to the green Audio-Out port
on the VideoMate M1F PCI Tuner card.
4. Plug the other end of the internal audio patch cable to the AUX-In socket
on your sound card or on the mainboard. The on-board sound usually has
AUX-In and CD-In connector. Make sure you connect to the right one.
Then you have to choose the audio source to be AUX or CD-In in the
System Device in Settings of ComproDTV 4.5.
5. Insert VideoMate M1F PCI card in an open PCI slot.
This completes the hardware installation. Please proceed to install the
software.
To Next Page
Loading...