Software Installation
After installing the PCI card and cables in your computer, you should restart it
and follow these steps to install the software.
Step 1. After restarting, Windows will detect your VideoMate M1F PCI card
and start the Add/Remove Hardware Wizard, prompting you to install
the VideoMate M1F PCI card drivers. Please press Cancel and go to
the next step.
Step 2. Insert the installation CD into your CD drive. If you have Autorun
enabled, the installer will start automatically. (If Autorun is disabled,
double-click on “setup.exe” on the installation CD.) Compro
recommends you choose Complete to install all necessary software
(VideoMate M1F drivers, ComproDTV, and ComproFM 2) or choose
Custom to install selected item by item. (We also provide the DiecrtX
9 and Acrobat Reader 6.0 software on the installation CD; you can
browse the CD folder and install them by your need.
Step 3. Press Next to install ComproDTV, Windows Media Format 9 Series
Runtime
Step 4. When installation completes, press Finish to restart computer.
Step 5. When computer is restarted, please start up ComproDTV 4.5. The
installation Wizard will guide you through the setup process.
To Next Page
Loading...