95
Passing over to the Power-On Configuration
At this point of the setup, it is possible to pass over to the Power On Configuration functions setting.
NEXT MACRO NO
↑
CONFIG MENU NO
→ or ←
CONFIG MENU YES
↓
↓
HEX DUMP NO EMUL. OPTIONS
These items are self-explaining.
Hexadecimal Dump
CONFIG MENU NO
↑
HEX DUMP NO
→ or ←
HEX DUMP YES
↓
STORE? QUIT
If you select HEX DUMP YES, press the PROGRAM key to set this item. The hexadecimal printing
continues, until the HEX DUMP NO item is selected, entering again into the Program Setup.
To Next Page
Loading...
