94
Selecting Another Macro
MACRO -> MFG NO
↑
NEXT MACRO? NO
→ or ←
NEXT MACRO? YES
↓
↓
CONFIG MENU NO
MACRO#1
To pass over to another macro, select NEXT MACRO YES. Pressing the ↓ or ↑ key the item MACRO#1 is
displayed, then press the → key to pass over to MACRO#2 (MACRO CHANGING is displayed).
When passing over from one macro to another, the fanfold paper loaded from the paper path,
selected in the previous macro, will be automatically parked (TEAR IF NECESS/PARK PAPER is
displayed). Tear off this fanfold paper and press PARK key.
You can now set the parameters for MACRO#2 as described above. In this way you prepare the
second printing environment. Passing over from one macro to the other then sets two different
printing environments.
To Next Page
Loading...
