Install USB Driver procedure.
1. Insert Compuprint documentation CD.
2. Insert USB cable
3. Power on the printer.
4. After few seconds System pops up the interface [Found New Hardware Wizard], for install
software about “SFERAL WWT LS A4 USB”,select “Install from a list specific location
(Advanced)” and click “Next” to continue .
5. Push Browse Button and select on Compuprint CD the path : Source\drivers\Compuprint
SP40\USB\Driver”
6. Then follow the instructions up to the end of installation software.
7. Next a second System pops up [Found New Hardware Wizard] request installation
software for “Compuprint SP 40” driver.
8. select “Install from a list specific location (Advanced)” and click “Next” to continue .
9. Push Browse Button and select on Compuprint CD the path : Source\drivers\Compuprint
SP40\USB\PrtDrv\Win2000_XP”
10. Then follow the instructions up to the end of installation software.
If the procedure has been correctly complete, on the list of hardware devices appear , under
“Universal Serial Bus Controllers” the follows three devices:
SFERAL WWT LS A4 USB
USB Composite Device
USB Printing Support
NOTE : to develop a user scanner applications refer to the appropriate dlls provide by
SFERAL WWT
B-02
To Previous Page
Loading...
