CompuSTAR Firstech CM800-S - Option Programming Tables; Feature Tables (1-01 to 1-11); Feature Tables (2-01 to 2-10); Feature Tables (3-01 to 3-11)

13
Option Programming Tables
Feature
Default Setting - I
Optional
Setting - II
Optional
Setting - III
Optional
Setting - IV
1-01
Unlock Before, Lock After
Starting
OFF
ON
Lock After Start
Only
Lock After
Shutdown Only
1-02
Lock / Unlock Pulse
Duration
0.8 sec
2.5 sec
0.125 sec
3.5 sec
1-03
Double Pulse Locks
Off
Unlock
Lock
Both
1-04
Driver's Priority Unlock
OFF
ON
1-05
Double Pulse Disarm
Standard
Double Pulse
1-06
Ign + Acc Pulse With
Disarm
OFF
ON
1-07
Remote Start Runtime
15 min
25 min
45 min
3 min
1-08
Auto Rearm
OFF
30 sec
60 sec
5 min
1-09
Trunk Output Timing
1 sec
0.5 sec
2 sec
1-10
Unlock/Disarm With Trunk
Release
Unlock, Factory
Disarm, and Trunk
Release
Factory Disarm,
Trunk Release Only
Trunk Release Only
1-11
Trigger Start
Triple Pulse
Double Pulse
Single Pulse
Off
Feature
Default Setting - I
Optional
Setting - II
Optional
Setting - III
Optional
Setting - IV
2-01
Timer Start or Minimum
interval
between cold Start
3 Hour
1.5 Hour
2-02
Minimum Crank Time With
Tachless Sensing
0.8 or 1.0 sec
by Option 2-05
+0.6 sec To Crank
Time
2-03
Ignition Controlled Door
Locks
OFF
ON
Ignition Lock Only
Ignition Unlock Only
2-04
Engine Sensing
Tachless
Tach
Alternator
3.0 sec Crank
2-05
Minimum Crank Time
Standard
+0.2 sec To Crank
Time
-0.2 sec To Crank
Time
2-06
Diesel Timer
Off
7 sec
18 sec
Delayed Ignition
(GM)
2-07
Rearm Output
1st Lock, After
Start, After
Shutdown
1st Lock, Shutdown
After Start Only
After Shutdown
Only
2-08
Horn Output
On Double Lock
On Lock and Unlock
On Lock, Unlock,
and Start
Panic Only
2-09
Horn Honk
Pulsed
Latched
2-10
Advanced Tachless
OFF
ON
Feature
Default Setting - I
Optional
Setting - II
Optional
Setting - III
Optional
Setting - IV
3-01
Secure Auxiliary Output
ON
OFF
On While Armed