- 29 -
5. TEMPORARY MODIFICATION OF THE
TEMPERATURE CORRESPONDING TO
THE PROGRAM
If you wish to operate your device in a way that diers tem-
porarily from the program that has been set (e.g. on bank
holidays or the winter holidays), you can choose among the
options described in Chapters 5.1 - 5.4.
To simplify manual temperature modications, with factory
default settings temperatures of °C and °C are assigned
to the large and buttons, respectively. When mod-
ifying the temperature manually, pressing the or
button once, the temperature will immediately jump to the
factory value of the button. For example, if the current switch
PROG ensures a temperature of °C, it can be modied
to a standard temperature that ensures °C when needed
by pressing the button only once, without having to
press the button several times in increments of 0.5 °C.
Following this, using the large and buttons, the
temperature can be further modied in increments of 0.5 °C,
To Next Page
Loading...
