- 28 -
the basic settings of the thermostat again and create
the new program, as described in Chapters 2 and 4.
4.6 Program inspection
• First, press the “SET” button to go to the main screen,
then press the “PROG” button. At this point, the
abbreviation indicating the day(s), the symbol of switch
PROG and the time and temperature level set for
switch PROG of the selected day(s) will appear on the
display (none of the values is ashing).
• Repeatedly press the “PROG” button to check the values
of switch PROG , PROG , etc. Use the large and
buttons to change the day(s). If all the days were pro-
grammed together (MON TUE WED THU FRI SAT SUN),
then their common program can only be viewed together.
• After checking the program, press the “SET” button to go
back to the main screen (if no buttons are pressed for at
least 15 seconds, the thermostat will automatically go back
to the main screen).
To Next Page
Loading...
