- 9 -
2. PUTTING THE THERMOSTAT INTO
OPERATION, BASIC SETTINGS
2.1 Inserting batteries
Pressing the lock on the upper
side of the housing of the ther-
mostat, remove the back cover
of the thermostat as shown in
the figure below.
The battery compartment is in
the inner side of the front panel
of the housing. Insert 2 AA alkaline batteries (LR6 type) in
accordance with the diagram in the battery compartment.
Warning! Alkaline batteries may only be used for this
appliance. Carbon-zinc batteries known as durable or long
life batteries and chargeable accumulators are not suitable
for the operation of this appliance. Icon appearing on the
display to indicate low battery voltage warns reliably that the
batteries should be replaced only when alkaline batteries
are used.
To Next Page
Loading...
