COMPX RegulatoR - Technician Mode - Operation

RegulatoR ® , Keyless Locking 17
Technician Mode - Operation
TO UNLOCK
1. Type the Technician Code and press ENTER.
2. Turn the knob clockwise 90° to the unlocked position (all three LED
lights will have a rotating blinking pattern).
3. To relock & retain the single use code that already exists; rotate the
knob 90° counter clockwise.
OR
To remove the existing single use code and leave the RegulatoR
unlocked:
Type the Technician Code and press ENTER.
Press 1 then press & hold CLEAR for 3 seconds.