COMPX RegulatoR User Manual

RegulatoR ® , Keyless Locking 6
Programming – Introduction
CompX
® RegulatoR ® is easy to program and operate. Type the user code
(factory default 1234) and press ENTER to lock or unlock the cabinet.
The supervisor can change operating codes, modes and restore lock settings.
While RegulatoR is easy to program, we highly recommend reading the
complete programming instructions prior to making any changes. Remember to
keep track of any programming changes.
Button locations, indicator lights and knob referenced in the programming
instructions are shown below.
CLEAR button erases any key input made in error
Indicator Lights
Green – Indicates button
input and valid code
Yellow - Indicates low
battery or program mode.
Red – Indicates incorrect
entry
Knob is always rotated
clockwise to unlock ENTER button is used to complete code
and counter clockwise to lock and begin programming

COMPX RegulatoR Specifications

General

Brand	COMPX
Model	RegulatoR
Category	Door locks
Language	English