21
While Device Manager is open and synced to a codec, it’s a good me to check to see if an update is available for
the product.
To do this, select the Firmware tab, shown in below.
The unit’s current rmware and the most recent version of rmware for the unit are listed at the top of the tab (1 in
). If the device isn’t running the latest version of rmware, click the “Get Latest Version” buon (2 in
) and download it. (If the unit’s Firmware is current, the buon will be grayed out.) Next, select “Update Device”
(3 in ), choose the .upd le just downloaded and click OK, and Device Manager will then update the unit’s
rmware.
To Next Page
Loading...
