3. When pressing, it is recommended that you use an ironing board
to achieve good results and prevent damage to furniture and
other surfaces.
4. If pressing different types of fabrics, start by pressing delicate
fabrics first at lower temperatures and gradually progress to
higher temperatures.
STORAGE
1. Turn off and unplug appliance after using.
2. Allow to cool before storing.
3. Empty any remaining water from the tank to avoid leakage.
4. Store in a cool, dry place, out of reach of children.
TROUBLE SHOOTING
PROBLEM POSSIBLE CAUSE SOLUTION
Steamer fails to
heat
Steamer is not
plugged in
Plug into power outlet and
switch product on
No steam Water level is low Switch product off and refill
water container
Note: Minerals in water will vary in different areas. To ensure
continued operation of the steamer, never store without cleaning
and removing excess water from the water container and the
water reservoir.
To Next Page
Loading...
Need help?
General
